中文

Home/Products/Micro-seismicSource location

Micro-seismic

Networked units capture micro-seismic events and invert source location and energy for mines, slopes and underground works.

Home › Products › Micro-seismic › Source Location / Micro-Vibration Monito 4
Source Location / Micro-Vibration Monito 4

Source Location / Micro-Vibration Monito 4

Micro-seismic

Micro-vibration monitoring and source-location equipment by ZKCK - microvolt-level resolution, cascadable to 32 channels.

Convenient communication

Free networking via LAN, mob…

High-speed processor

low-power high-speed process…

Powerful display

High-resolution LCD with Win…

Wireless access

Built-in 4G all-netcom (Chin…

Enquire: 13088055927 / 028-85238246View all Micro-seismic →

Key Specifications

Parameters below are extracted from this page; values and units are kept verbatim.

Convenient communicationFree networking via LAN, mobile signal and public network - distributed monitoring systems built to suit on-site signal conditions
High-speed processorlow-power high-speed processor enables 3/6-channel parallel acquisition;
Powerful displayHigh-resolution LCD with Windows-style menus and windows plus full waveform analysis;
Wireless accessBuilt-in 4G all-netcom (China Mobile/Unicom/Telecom) and WiFi communication;
Wired accessUSB/LAN/WAN/ADSL wired network access;
Multi-level alarmsRemote active event reporting - set event types and push alarm messages to users in real time;
Multi-platformPhone and handheld clients allow system management and maintenance anytime, anywhere;
Compact and portableSmall and light - easy to carry, ideal for all kinds of job sites.
Source locationMulti-unit source location - suitable for mine and similar source monitoring
· Channels3/6-channel parallel acquisition, cascadable to 32 channels
· Frequency range5-500 Hz (standard), DC-100 Hz (optional), 1-500 Hz (low-frequency)
· LicenseNational manufacturing metrology license (CMC) Chuan-Zhi 00000395

Convenient communication:  Free networking via LAN, mobile signal and public network - distributed monitoring systems built to suit on-site signal conditions

High-speed processor: low-power high-speed processor enables 3/6-channel parallel acquisition;

High-performance transmission:  Ethernet up to 100 Mbps with stable data rates up to 6 MB/s;

Powerful display:  High-resolution LCD with Windows-style menus and windows plus full waveform analysis;

Wireless access:    Built-in 4G all-netcom (China Mobile/Unicom/Telecom) and WiFi communication;

Wired access:    USB/LAN/WAN/ADSL wired network access;

Multi-level alarms:  Remote active event reporting - set event types and push alarm messages to users in real time;

Multi-platform:  Phone and handheld clients allow system management and maintenance anytime, anywhere;

Compact and portable:  Small and light - easy to carry, ideal for all kinds of job sites.

Source location:      Multi-unit source location - suitable for mine and similar source monitoring

▲ Vibration monitoring

· Channels:      3/6-channel parallel acquisition, cascadable to 32 channels

· Frequency range:      5-500 Hz (standard),  DC-100 Hz (optional), 1-500 Hz (low-frequency)

· License:      National manufacturing metrology license (CMC) Chuan-Zhi 00000395

· Range:       Self-adaptive, no setting needed

· Resolution:        Vibration signals above 1 uV are identifiable (acceleration: 10-6 m/ s2 , velocity:  4×108 m/s)

· Self-noise:   0.25 uV rms.

·A / D    :       24 Bit

· Trigger mode:      Internal, external, synchronized trigger

· Trigger level:      0-10 V  freely adjustable; units set per sensor

· Clock accuracy:      ≤5 s/month

▲ Communication & terminals

· Wired:    USB / LAN / WAN / ADSL/

· Wireless:    WiFi LAN, China Mobile/Unicom/Telecom 4G all-netcom, etc.

· Transfer rate:     100 Mbps high-speed Ethernet, stable rates up to 6 MB/s

· Terminal display:      PC software, phone/handheld clients and browser web end

· SMS alarm:    4 number groups (regular/emergency)

· Power on/off:    Scheduled remote power on/off

· Permission management:      Multi-level user permissions (view/delete data, set parameters, acquisition control, etc.)

· Distributed control:    Instruments in different regions centrally controlled via the Internet for remote management

·Positioning & timing:      BeiDou + GPS hybrid, 1 ns accuracy, per-second sync

▲ Vibration recording

· Record mode:      Manual, single, multi-segment, continuous

· Sampling rate:      1K/2K/4K/8K/16K/32K/64K, adjustable

· Storage:      Expandable, built-in flash with on-board read/write - fast and stable, up to about 57,000 records

▲ Operating environment

· Battery:      Over 30 hours                     

· Environment:      -10 ℃ to 75 ℃, 90 % RH non-condensing

· Protection:      IP64 splash-proof

▲ Physical specifications

· Main unit:      185 mm × 120 mm × 80 mm

· Sensor size:      66 mm × 66 mm × 66 mm

· Weight:      1.8 kg

· Power supply:      Dedicated rechargeable lithium battery; continuous external power optional

· Display:      3.7-inch 320×240 LCD

· User interface:      PVC keyboard

· Ports:      All-aviation-connector I/O

▲ Analysis & reports

· Data analysis:      Frequency spectrum, power spectrum, first-order integration/differentiation, vector composition, high/low-pass filtering, etc.

· Monitoring report:      Point information entry, automatic report generation, one-click printing

· Data archiving:      TXT/Word/dat export, batch report export

▲ Application examples

1.  ZKCK and the Science & Technology Dept. of PetroChina Southwest Oil & Gas Field (BGP Southwest) jointly introduced a background-noise (micro-vibration) survey for petroleum vibration geophysical exploration sites. Before formal exploration work, the instrument quickly maps vibration-noise interference sources around the site - underground pump houses, construction, machinery vibration, etc. - so these factors can be filtered out in formal processing.

2.  In fracturing micro-vibration monitoring for shale oil/gas exploration, the instrument offers clear advantages - compact, portable, highly sensitive, with wireless data transmission and networking.

3.  The instrument also plays an important role in vibration-geology surveys of large buildings.

4.  Effective for vibration monitoring of high-speed railway roadbeds and settlement judgment.

5.  For monitoring natural earthquakes, Earth microtremors and weak vibrations.

QQ图片20200331153718.jpg


PreviousNoneNextNone

Why Choose ZKCK

30 years in the industry · CPA-certified quality · Stable, always-online devices · 2-year warranty with free repair · Free platform integration

View SolutionsContact Us