Industry Solution · Hydropower & Water Resources
Hydropower & Water Project Blasting Vibration Monitoring Solution
Long-term vibration surveillance of dams & hydraulic structures

Diversion-tunnel excavation, cofferdam removal, dam-foundation excavation, spillway widening — blasting on hydropower sites must move rock without shaking the dam or damaging the grout curtain. Monitoring data feeds design and acceptance directly; ambiguity is unacceptable. ZKCK provides hydropower projects with a blasting vibration monitoring scheme that meets hydraulic-engineering standards.
Pain PointsPAIN POINTS
Dams, fresh concrete, grouting zones, anchorage structures and powerhouse — damage runs into hundreds of millions.
Concrete under 3 days of age has extremely low allowable velocity — blast timing windows and vibration control must link precisely.
Results must be reported periodically in standard, traceable formats.
Uneven 4G coverage in dam areas; points scattered across abutments, foundation pit and diversion-tunnel portals.
Reference StandardsSTANDARDS
Safe allowable PPV criteria for hydraulic structures
Hydropower blasting construction and vibration control
Blasting safety monitoring methods and result compilation
Key ChallengesCHALLENGES
Allowable criteria differ by zone (fresh concrete by age, bedrock by lithology, dam body by structure) — evaluation must be zoned and graded.
Large elevation difference between pit bottom and dam crest — installation conditions vary widely.
Construction spans years with huge data volumes — long-term storage and trend analysis are required.
SolutionsSOLUTION
6850 / 4850N series
4G · WiFi · LAN
Alarm · Reports · Regulator upload
TC-4850-3/6
Near-field monitoring of pit / diversion tunnel
24-bit precision, 0.0001 cm/s resolution for micro-vibration; self-adaptive range, no setup; Sadovsky regression K, α directly serving blast design
TC-4850N-3/6
Long-term monitoring of dam body / abutment / slope
Local ≈1 TB + unlimited cloud storage; 4G / Wi-Fi / LAN / RS-485 hybrid networking; remote scheduled power on/off; external battery 30+ days + solar power
Recommended combination: TC-4850-3/6 (pit excavation tracking) + TC-4850N-3/6 (dam-area long-term online)

Field photos: hydraulic-structure monitoring points (bottom right), solar powered, online year-round
Deployment & ParametersDEPLOYMENT
Set points near fresh concrete, in the curtain-grouting zone, behind abutment excavations and at nearby houses — apply different allowable values by age and location.
Swap sensors on the TC-4850N as needed: velocity, acceleration, underwater shock-wave, noise — one network, multiple quantities.
Multi-unit synchronized triggering on a common time axis; frequency spectra + sectioned analysis separate blasting from mechanical disturbance.
Statistics and trend reports batch-export to Word/PDF via the cloud — plug straight into monthly safety bulletins.
Why ZKCKWHY ZKCK
CAS technical heritage; data formatted per the DL/T system, ready for direct archiving.
≈1 TB local + unlimited cloud — not a single event lost across years of monitoring.
Switch velocity / acceleration / shock-wave / noise as needed — one system for cofferdam underwater blasting and land excavation.
Cloud, API and alarms all free — zero platform cost across multi-year projects.
TC-4850 Blasting Vibration MeterPortable · Self-adaptive range · Fast deploymentView details →
TC-4850N Network Vibration Meter3/6 channels · Solar + battery · Long-term onlineView details →
6850 Integrated Network VibrometerVelocity + acceleration · Only 560g · OLED displayView details →More Solutions
- Section: Solutions
- Platform: ZKCK Cloud (Online Monitoring)