1 Scope
This standard specifies the principles, basis, content, organization, planning, procedures and documentation of blasting safety supervision.
This standard applies to the blasting safety supervision of blasting operations permitted by public security organs; other projects requiring blasting safety supervision may refer to it.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated version applies.
For undated references, the latest version (including all amendments) applies.
GB 6722 Safety Regulations for Blasting
GA 991 Management Requirements for Blasting Operation Projects
GA 990 Qualification Conditions and Management Measures for Blasting Operation Units
GA 53 Qualification Conditions and Management Requirements for Blasting Personnel
3 Terms and Definitions
The terms and definitions defined in GB 6722, GA 991, GA 990 and GA 53, as well as the following, apply to this document.
3.1 Blasting safety supervision
Professional safety supervision and management of blasting operation projects, entrusted by the construction unit and performed per relevant national laws, regulations and mandatory standards.
3.2 Blasting safety supervision unit
A unit with corresponding qualifications legally engaged in blasting safety supervision.
3.3 Blasting safety supervision agency
An agency stationed at the project by the blasting safety supervision unit according to the blasting engineering grade and characteristics, fully responsible for blasting safety supervision.
3.4 Chief supervision engineer
A person holding a senior Blasting Operation Permit not lower than the blasting engineering grade, fully responsible for blasting safety supervision.
3.5 Representative of the chief supervision engineer
A person holding an intermediate or above Blasting Operation Permit who exercises part of the duties of the chief supervision engineer on their behalf.
T/CSEB 0010—2019
3.6 Supervision engineer
A person holding an intermediate or above Blasting Operation Permit responsible for the safety supervision of the blasting operation project.
3.7 Site supervisor
A person holding a junior or above Blasting Operation Permit engaged in on-site blasting safety supervision.
3.8 Blasting safety supervision planning
A document prepared under the direction of the chief supervision engineer and approved by the technical head of the blasting safety supervision unit, used to guide blasting safety supervision.
3.9 Detailed rules for blasting safety supervision
An operational document prepared by the supervision engineer based on the blasting safety supervision planning and approved by the chief supervision engineer, used to implement blasting safety supervision.
3.10 During blasting operation
The process from delivery of blasting materials to the blasting operation site until the end of the operation, including handover, inspection, charging, stemming, network connection, guarding, initiation, post-blast inspection, return to warehouse and misfire treatment.
3.11 Daily record of blasting safety supervision
The daily record made by the blasting safety supervision agency on supervision work and blasting operation safety.
3.12 Blasting safety supervision summary report
A report on the whole supervision process of the blasting operation project, prepared by the blasting safety supervision agency after project completion.
4 General Requirements for Blasting Safety Supervision
4.1 The blasting safety supervision unit shall undertake blasting safety supervision business per GA 990, provide services fairly, independently, honestly and scientifically in accordance with the law, and accept the supervision and administration of public security organs.
4.2 The principal person of the blasting safety supervision unit shall take full responsibility for its supervision work; a chief-supervision-engineer responsibility system shall be implemented.
4.3 For blasting safety supervision across provincial/autonomous-region/municipality boundaries, the relevant information of the supervision project shall be reported in advance to the county-level public security organ where the blasting operation takes place.
4.4 In the same blasting operation project, the blasting safety supervision unit shall have no subordination, affiliation or interest relationship with the blasting design/construction unit or the blasting safety assessment unit.
4.5 Blasting safety supervision shall not replace the safety management of the blasting design and construction unit. The supervision unit and personnel bear corresponding responsibilities in accordance with the law.
4.6 Blasting safety supervision shall be entrusted by the construction unit, which signs a written blasting safety supervision contract with the supervision unit.
4.7 The blasting safety supervision contract shall specify the scope, content, responsibilities, schedule and costs of the supervision.