Qualification Conditions and Management Requirements for Blasting Personnel
Qualifications and management requirements for blasting personnel
GA 53—2015
Replaces GA 53-1993
Ministry of Public Security of the People's Republic of China Released on 2015-11-13 Implemented on 2016-01-01
Foreword
All the technical contents of this standard are mandatory.
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GA 53-1993 Assessment Standard for Safety Techniques of Blasting Personnel. In addition to editorial modifications, the main technical changes are as follows:
-- Changed the standard name;
-- Changed the chapter arrangement structure;
-- Changed the classification of blasting personnel (see Chapter 4, 1993 edition 1.3);
-- Changed the grading of blasting engineering technicians (see Chapter 5, 1993 edition 4.1);
-- Added the qualification conditions for blasting personnel (see Chapter 6);
-- Added the position setup and responsibility requirements for blasting personnel (see Chapter 7);
-- Changed the training and education requirements for blasting personnel (see 8.1, 1993 edition Chapter 4);
-- Changed the license management and assessment requirements for blasting personnel (see 8.2, 1993 edition Chapters 3, 5 and 6);
-- Added other management requirements for blasting personnel (see Chapter 9);
-- Deleted the periodic re-review requirements for blasting personnel certificates (see 1993 edition 6.3.1).
This standard was proposed by the Public Security Administration Bureau of the Ministry of Public Security.
This standard is under the jurisdiction of the Technical Committee on Standardization of Fundamental Application for Social Public Security of the Ministry of Public Security.
The main drafting organizations of this standard: the Public Security Administration Bureau of the Ministry of Public Security and the China Engineering Blasting Association.
The main drafters of this standard: Yan Zhengbin, Wang Xuguang, Qi Xiguo, Zhang Guoliang, Gao Yintong, Qu Guangjian, Fang Guifu, Wang Xiaolin and Zhang Zhengzhong.
Qualification Conditions and Management Requirements for Blasting Personnel
1 Scope
This standard specifies the classification, grading, qualification conditions, position setup and responsibility requirements, and management requirements for blasting personnel.
This standard applies to the qualification management and daily management of blasting personnel.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document.
GB 6722-2014 Safety Regulations for Blasting
GA 990 Qualification Conditions and Management Requirements for Blasting Operation Units
GA 991 Management Requirements for Blasting Projects
3 Terms and Definitions
The terms and definitions defined in GB 6722-2014 and GA 990 apply to this document. For ease of use, some terms and definitions in
GB 6722-2014 are repeated below.
3.1
Blasting operation blasting
The operation of using the explosive energy of explosives to do work on the medium in order to achieve the intended engineering objectives.
[GB 6722-2014, definition 3.1]
3.2
Blasting operation unit blasting unit
A unit holding the Blasting Operation Unit License and engaging in blasting operations, divided into non-business and business categories. A non-business blasting operation unit refers to a unit that carries out blasting operations on its own within a limited area only for the needs of its legitimate production activities; a business blasting operation unit refers to a unit with independent legal person status that undertakes the design and construction, safety assessment and safety supervision of blasting projects.
[GB 6722-2014, definition 3.2]
3.3
Blasting engineering technician blasting engineering and technical personnel
A technical person who has blasting professional knowledge and practical experience, has passed the assessment, and has obtained the qualification certificate for engaging in blasting work.
[GB 6722-2014, definition 3.3]
3.4
Blasting personnel blasting personnel
Blasting engineering technicians, blasters, safety officers and storekeepers engaged in blasting operations.
[GB 6722-2014, definition 3.4]
4 Classification
Blasting personnel are divided into blasting engineering technicians, blasters, safety officers and storekeepers.
5 Grading
5.1 Blasting engineering technicians are divided into Senior/A, Senior/B, Intermediate/C and Junior/D. The correspondence between qualification grades and scope of operations is shown in Table 1.
5.2 Blasters, safety officers and storekeepers are not graded.
Table 1 Correspondence between qualification grades and scope of operations of blasting engineering technicians
Qualification Grade | Scope of Operations |
Senior/A | Class A and below blasting projects |
Senior/B | Class B and below blasting projects |
Intermediate/C | Class C and below blasting projects |
Junior/D | Class D and Below Blasting Projects |
Note 1: Class A, B, C and D of the scope of operations in the table refer to the corresponding grades of blasting engineering specified in GB 6722-2014. Note 2: The qualification conditions for blasting engineering technicians are given in 6.2.1. | |
6 Qualification Conditions
6.1 General Requirements
The general requirements for the qualification conditions of blasting personnel are:
a) No disease or physiological defect that hinders blasting operations;
b) Full civil capacity;
c) No criminal punishment record;
d) No terrorist involvement, drug use or other situations unsuitable for engaging in blasting operations.
6.2 Special Requirements
6.2.1 Qualification Conditions for Blasting Engineering Technicians
The qualification conditions for blasting engineering technicians are:
a) Aged 18 years or above and not more than 70 years;
b) For applying for Junior/D blasting engineering technician, one should have obtained a junior college degree in science or engineering and engaged in blasting-related work for more than 3 years, or obtained a bachelor's degree in science or engineering and engaged in blasting-related work for more than 1 year;
c) For applying for Intermediate/C blasting engineering technician, one should have obtained a master's degree in science or engineering and engaged in blasting-related work for more than 2 years, or after obtaining the Junior/D blasting engineering technician qualification, continuously engaged in blasting-related work for more than 4 years and presided over the design and construction of no fewer than 3 Class D blasting projects;
d) For applying for Senior/B blasting engineering technician, one should have obtained a doctoral degree in science or engineering and engaged in blasting-related work for more than 2 years, or after obtaining the Intermediate/C blasting engineering technician qualification, continuously engaged in blasting-related work for more than 4 years and presided over the design and construction of no fewer than 3 Class C blasting projects;
e) For applying for Senior/A blasting engineering technician, one should have obtained the Senior/B blasting engineering technician qualification, continuously engaged in blasting-related work for more than 4 years, and presided over the design and construction of no fewer than 5 Class B blasting projects;
f) Those who participated in the design and construction, safety assessment and safety supervision of blasting projects in the past 3 years have had no blasting liability accidents.
6.2.2 Qualification Conditions for Blasters, Safety Officers and Storekeepers
The qualification conditions for blasters, safety officers and storekeepers are:
a) Aged 18 years or above and not more than 60 years;
b) Education level of junior high school or above;
c) No blasting liability accidents in the past 3 years.
7 Position Setup and Responsibility Requirements
7.1 Position Setup
7.1.1 According to the different division of position responsibilities, blasting operation units shall set up the posts of unit technical director, project technical director, blaster, safety officer and storekeeper.
7.1.2 The unit technical director and project technical director shall be held by blasting engineering technicians and may be held concurrently.
7.1.3 The posts of blaster, safety officer and storekeeper shall not be held concurrently.
7.2 Position Responsibility Requirements
The position responsibilities of the unit technical director, project technical director, blaster, safety officer and storekeeper shall comply with the provisions of GA 990.
8 Qualification Management Requirements
8.1 Training and Education
8.1.1 Initial Training
8.1.1.1 Blasting engineering technicians applying for the Blasting Personnel License for the first time shall participate in no less than 240 class hours of safety technical training.
8.1.1.2 Blasters, safety officers and storekeepers applying for the Blasting Personnel License for the first time shall participate in no less than 72 class hours of safety technical training.
8.1.2 Continuing Education and Training
8.1.2.1 Blasting engineering technicians shall participate in no less than 40 class hours of continuing education and training every year.
8.1.2.2 Blasters, safety officers and storekeepers shall participate in no less than 20 class hours of continuing education and training every year.
8.1.3 Training Organization
8.1.3.1 The initial training and continuing education training of blasting personnel shall be organized by the blasting operation unit itself or entrusted to professional training institutions and industry associations.
8.1.3.2 Units organizing the training of blasting personnel shall have fixed teaching places and full-time staff; the training instructors shall be certified by the provincial public security organ.
8.1.3.3 The training of blasting personnel shall use unified and standardized training materials, and courses and teaching contents shall be set with reference to 8.2.2.3.
8.1.3.4 Units organizing the training of blasting personnel shall establish training archives, and within 10 days after the end of the training, enter the information of trainees, time, location, instructors and contents through the blasting personnel training assessment information system, and issue training participation certificates to the trainees.
8.2 License Management
8.2.1 Application
8.2.1.1 Blasters, safety officers and storekeepers applying for the Blasting Personnel License shall apply to the municipal public security organ (of a city divided into districts) at the unit's location, and submit the Blasting Personnel License application form (see Annex A) and the following materials:
a) Copy of identity certificate;