GB/T 50452-2008 Technical Code for Protection of Historic Buildings Against Industrial Vibration
Download:GB/T 50452-2008 Technical Code for Protection of Historic Buildings Against Industrial Vibration
Standard Introduction
This code was approved and issued by the Ministry of Housing and Urban-Rural Development with Announcement No. 121, and has been implemented since January 1, 2009.
This code includes: 1. General provisions; 2. Terms and symbols; 3. Permissible vibration standards for historic building structures; 4. Evaluation of the influence of industrial vibration on historic building structures; 5. Propagation of ground vibration from industrial vibration sources; 6. Calculation of the dynamic characteristics and response of historic building structures; 7. Testing of the dynamic characteristics and response of historic building structures; 8. Anti-vibration measures.
The Technical Code for Protection of Historic Buildings Against Industrial Vibration (GB/T 50452-2008) was compiled according to the requirements of the Plan for Formulating and Revising National Standards for Engineering Construction in 1999 (Jian-Biao [1999] No. 308) of the Ministry of Construction. Before compiling this code, the research project on the Influence of Industrial Environmental Vibration on Cultural Relics and Historic Sites and Corresponding Codes was carried out; field tests and laboratory experiments were conducted on the main industrial vibration sources, representative historic building structures and historic building materials nationwide, obtaining a large amount of original data available for analysis; theoretical research and practical verification were carried out on aspects such as the vibration control standards of historic building structures and the dynamic characteristics and response of structures, providing a scientific and reliable basis for formulating the code.
During the compilation process, based on the above scientific research results and practical experience, the compilation group widely solicited opinions from relevant units, experts and scholars in various ways on the main contents and issues of the code, discussed and revised repeatedly, completed the draft for review and the draft for approval of the code, and finalized it at the national review meeting.
This code consists of 8 chapters and 2 annexes. The main contents are: permissible vibration standards for historic building structures, evaluation of the influence of industrial vibration on historic building structures, propagation of ground vibration from industrial vibration sources, calculation and testing of the dynamic characteristics and response of historic building structures, and anti-vibration measures.
This code is administered and interpreted by the Ministry of Housing and Urban-Rural Development, and the specific technical contents are interpreted by Wuzhou Engineering Design and Research Institute.