中文

News

Selection and Number of Monitoring Points in Blasting Vibration Monitoring

Zhongke Instruments · News2022-11-30 16:28:47

Home/News/Selection and Number of Monitoring Points in Blasting Vibration Monitoring
Content

In blasting vibration monitoring, testers often struggle with point selection. This article summarizes point selection and numbers in multiple scenarios

01 Testing blasting vibration attenuation law (regression analysis): no fewer than 6 points per monitoring session.

02 One-time blasting monitoring: match points as needed.

03 Long-term blasting monitoring: 2 or more points.

04 Foundation pit monitoring: 1-2 or more points; for pits longer than 1,000 m, arrange 1 point per kilometer .

05 Hydropower project blasting monitoring: 3-6 or more points.

06 Mine engineering blasting monitoring: 1-2 or more points; for distances over 1,000 m, arrange 1 point per kilometer.

07 High slopes at underground project entrances/exits: arrange 1-2 or more points.

08 Railway and highway engineering blasting monitoring: 1-3 or more points.

08 Building (structure) foundation pit blasting monitoring:  1-3 or more points.

09 High-slope and foundation pit excavation blasting: no fewer than 3 monitoring points per monitoring section.

10 Underground large cavern excavation blasting: 3-9 or more points.

11 Pipeline blasting safety monitoring: 1-3 or more points.

12 Urban road, bridge and rail transit blasting safety monitoring: 2-6 or more points.

13 Dynamic compaction and piling vibration monitoring: 2-6 or more points.

14 Blasting operation unit qualification review - Grade D: net value of blasting construction machinery and testing/measuring equipment no less than 1 million RMB, 1 unit; Grade C: no less than 1.5 million, 1-2 units; Grade B: no less than 5 million, 2-5 units; Grade A: no less than 10 million, 5-10 units.

15 Blasting construction near railways: 1-5 or more points.爆破振动测点的选择