Basic principles of blasting safety assessment:
1. The blasting safety assessment unit shall undertake assessment work per its qualification grade and perform it independently and scientifically in accordance with the law.
2. Blasting projects implemented near cities, scenic areas and important engineering facilities shall undergo blasting safety assessment per the standards in the Blasting Safety Assessment Code; other projects requiring assessment may refer to it.
3. The construction unit shall sign a blasting safety assessment contract with the assessment unit.
5. If actual conditions are found inconsistent with the materials submitted at assessment and the original design documents need modification, major modifications shall be re-submitted for assessment.
6. For major blasting projects in highly complex environments, the construction unit or project owner shall invite (or entrust) expert consultation; the assessment unit shall prepare the blasting safety assessment report on the basis of the expert panel's opinions.
Assessment basis - in addition to relevant laws, regulations, administrative rules and technical standards, blasting safety assessment shall also be based on the following documents:
I. Materials submitted by the entrusting unit:
1. Assessment entrustment contract;
2. Project approval document or related documents of the blasting project;
3. Legal and valid blasting construction contract;
4. Qualification and credit materials of the blasting operation unit and personnel;
5. Blasting design documents prepared by the blasting operation unit;
6. Description of ground, underground and aerial facilities near the blast zone provided by the entrusting unit;
7. Other relevant materials;
II. Materials collected by the assessment unit during site reconnaissance:
1. Site plan of the blast zone with annotations;
2. Annotations of the blasted objects;
3. Annotations of important protected objects within 100 m, 300 m, 500 m and 1,000 m of the blast zone;
4. Written reconnaissance records, charts and other materials;
Assessment content - blasting safety assessment shall include:
Whether the qualifications of the blasting operation unit meet the regulations;
Whether the qualifications of blasting personnel meet the regulations;
Whether the setup and responsibilities of blasting operation posts meet the requirements;
Whether the blasting engineering grade meets the regulations;
Whether the data on which the design is based is complete;
Whether the selected design scheme is feasible;
Whether the design methods and parameters are reasonable;
Whether the initiation network is reliable;
Whether the harmful effects and the scope of possible influence are fully covered;
Whether the measures ensuring engineering environment safety are feasible;
Whether the emergency plan formulated is appropriate;
Assessment unit, personnel and work organization:
Assessment unit qualifications:
The blasting safety assessment unit shall hold an enterprise legal-person business license and a Blasting Operation Unit License issued by the public security organ, and undertake assessment projects per the licensed qualification grade and business scope, as follows:
Grade-1 qualified commercial blasting operation units may undertake safety assessment of blasting projects of all grades.
Grade-2 qualified commercial blasting operation units may undertake safety assessment of Grade B and below blasting projects.
Assessment personnel qualifications:
Blasting safety assessment personnel shall hold an intermediate or above Blasting Operator License and be registered personnel of the assessment unit.
Assessment work organization:
1. After accepting the assessment entrustment, the assessment unit shall form an assessment team of no fewer than 3 persons according to the blasting engineering grade and designate a team leader.
2. The team leader shall hold a senior Blasting Operator License with an operation grade not lower than the blasting engineering grade.
3. For Grade A and B blasting projects or major blasting projects in very complex environments, at least 2 team members shall hold Blasting Operator Licenses matching the blasting engineering grade.
Assessment process
Conduct a preliminary review of the materials submitted by the entrusting unit. The blasting operation project, unit and personnel shall comply with GA 991, GA 990 and GA 53.
After site reconnaissance, assess and review whether the submitted blasting design meets safety requirements, and propose modification opinions.
Make a clear conformity assessment conclusion on the revised blasting design, and propose targeted, reasonable and feasible safety measures and suggestions.
The assessment process is shown in the figure
