Content
With the rapid development of the national economy, health monitoring of public infrastructure such as bridges and large building structures is of great significance for ensuring normal operation and preventing major public safety accidents caused by structural disasters.
The bridge safety monitoring system mainly monitors the safety performance indicators of bridge span structures. Through health monitoring, it reflects the structural response and mechanical characteristics of the bridge under normal traffic loads and environmental actions, analyzes the structural health state, evaluates structural reliability, and provides a scientific basis for bridge management and maintenance.
Bridge monitoring mainly performs structural monitoring, structural dynamic characteristic monitoring, meteorological monitoring and/or video monitoring of key bridges.
Structural monitoring: main girder deflection, pier tilt, support displacement, structural cracks, stress-strain monitoring, etc.
Meteorological monitoring: mainly precipitation and atmospheric conditions at the bridge location - temperature, humidity, pressure, wind, etc.
Vibration monitoring: mainly the vibration in three directions of the bridge, natural vibration characteristics and cable force monitoring.
Video monitoring: monitoring vehicle operations on the bridge deck.
The 4850N network vibration meter monitors the measurement parameters of each bridge point in real time. The system runs continuously unattended; collected data is available for remote transmission and sampling parameters can be set remotely online. Bridge data is displayed, recorded and printed in real time as numbers or curves, with 24-hour continuous sampling; under alarm conditions, special sampling and manually intervened sampling can be performed. Point data can be set as needed, and raw data can be filtered, computed and otherwise processed.
Specially designed ultra-low-frequency, high-sensitivity vibration velocity sensors can be equipped, whose effective frequency range covers the lowest frequencies of extra-large bridges, with good flatness, meeting the monitoring needs of bridges and large buildings.
The 4850N network vibration meter can be equipped with different sensors to monitor different data, such as vibration velocity, acceleration, displacement, pressure, etc.

To learn more about the4850N network vibration meter, call 028-85238246