Home › Case Studies › Field Blasting Vibration Monitoring with TC-4850N
Field Blasting Vibration Monitoring with TC-4850N
Monitoring Scene
Success case
Instrument
TC-4850N
Category
Case Studies
Field blasting vibration monitoring with TC-4850N - open-pit mine case
Operator -
capacity 16G
Contact: 13088055927 / 028-85238246
Summary: The TC-4850 blasting vibration meter developed by Chengdu Zhongke Chuankong measures the peak particle velocity and frequency of ground vibration at monitoring points during blasting. It is suitable for vibration monitoring of dam, bridge, tunnel, railway and highway blasting projects, environmental safety assessment of blasting operations and vibration monitoring in similar fields, and can also serve as teaching equipment for related university courses.
capacity 16G
Contact: 13088055927 / 028-85238246
Summary: The TC-4850 blasting vibration meter developed by Chengdu Zhongke Chuankong measures the peak particle velocity and frequency of ground vibration at monitoring points during blasting. It is suitable for vibration monitoring of dam, bridge, tunnel, railway and highway blasting projects, environmental safety assessment of blasting operations and vibration monitoring in similar fields, and can also serve as teaching equipment for related university courses.
Application of TC-4850N network vibration meter in field blasting vibration monitoring - open-pit mine
Vibration monitoring of electronic detonator blasting at the Huairou cement plant limestone mine
Keywords: blasting vibration monitoring, mine blasting vibration testing, wireless network monitor, blasting vibration meter
Recently, many provinces and cities in China have been promoting the use of electronic detonators, and the promotion in Beijing has entered a substantial stage. Currently, the Beijing electronic detonator
promotion requires field blasting tests to verify reliability and vibration reduction. Through hole-by-hole delay blasting tests with electronic detonators and analysis of vibration characteristics, an appropriate hole-by-hole delay time can be found. Commissioned by the blasting contractor, we tested and analyzed the blasting vibration. On November 25, 2011, an electronic detonator blasting test was carried out at the Xingfa cement plant mine in Huairou: 20 holes in 2 rows, deck charging within holes, 5 ms delay between charges in the same hole, 17 ms between adjacent holes, 128 ms between rows, about 150 kg per hole, 3 t total. We laid out a monitoring line behind-left of the blast zone with 5 points at distances from 65 m to 246 m, as shown in Figure 5. By analyzing waveform parameters at different distances, the propagation and attenuation laws of electronic detonator blasting vibration were obtained. As this wireless real-time transmission system was newly developed, to verify its reliability, technicians on site in Beijing notified relevant leaders in Shenzhen, whose regulatory department obtained an authorized password for live tracking. The blast was fired at 11:30 am; both Beijing and Shenzhen obtained the test results immediately (see Table 2).Electronic detonator blasting test site 3G network blasting vibration test site (Point 3)
Figure 5: Layout of the blast zone and monitoring points
Fig.5 The Blasting area and monitoring pointsarrangement
Table 2: Blasting vibration test results of all monitoring points
Table 2 Test data of blasting vibration
Point No. | Horizontal distance to blast zone m | Radial cm/s | Transverse (cm/s) | Vertical cm/s |
1 | 56 | 6.44 | 6.3 | 10.49 |
2 | 85 | 7.22 | 4.01 | 5.94 |
3 | 121 | 3.71 | 4.55 | 5.04 |
4 | 168 | 1.64 | 3.22 | 3.74 |
5 | 210 | 1.21 | 1.49 | 1.41 |
Figure 6 shows the waveform at Point 1. The vibration duration matches the electronic detonator delay settings, and the waveform well reflects near-field ground vibration. Data transmission was very fast and the waveform complete, facilitating later analysis.
Point 1 X-axis vibration 1 Point 1 Y-axis vibration
Point 1 Z-axis vibration waveform
Figure 6: Electronic detonator blasting vibration waveform
Fig.6 The vibration waveform of electronic detonator blasting
Keywords: blasting vibration monitoring, mine blasting vibration testing, wireless network monitor
