
TCS-B3 Triaxial Vibration Velocity Senso 4
SensorsThe triaxial vibration velocity sensor is widely used in blasting vibration, mechanical vibration, contact displacement, petroleum exploration, seismic waves and other testing fields. Compact, easy to install, highly accurate and anti-interference, it meets diversified user requirements. Mounting, cable and connector can be customized.
· Frequency range
X Y Z (5-300 Hz),
· Measured parameter
vibration velocity;
· Sensitivity
26~28V/m/s
· Damping coefficient
0.60
Key Specifications
Parameters below are extracted from this page; values and units are kept verbatim.
The TCS-B3 triaxial vibration velocity sensor is widely used in blasting vibration, mechanical vibration, contact displacement, petroleum exploration, seismic waves and other testing fields. Compact, easy to install, highly accurate and anti-interference, it meets diversified user requirements. Mounting, cable and connector can be customized.
In addition, the sensor is available in a low-frequency version (TCS-D3), waterproof, large/small range and high-sensitivity versions. Call us for details.
▲ Applications
· Environmental safety assessment of engineering blasting
· Blasting vibration monitoring / blasting construction supervision
· Machinery vibration / transport vibration safety monitoring
· Teaching and research analysis
· Blasting monitoring in complex environments such as underground and tunnel construction
· Fixed-point vibration monitoring of bridges, high-rises, slopes and dams
· Long-term fixed-point vibration monitoring of precision production equipment and environments
· Monitoring of seismic effects induced by piling, dynamic compaction and other construction
· Protection of historic buildings and major structures near construction sites
▲ TCS-B3 main specifications
· Frequency range: X Y Z (5-300 Hz),
· Measured parameter: vibration velocity;
· Sensitivity: 26~28V/m/s
· Damping coefficient: 0.60
· Output impedance: 380 Ω
· Harmonic distortion: ≤0.2%
· Operating temperature: -40 to 70 °C
· Dimensions: 66 × 66 × 66 mm
· Weight: 687 g
▲ TCS-D3 main specifications
· Frequency range: X, Y, Z (1-500 Hz),
· Measured parameter: vibration velocity;
· Sensitivity: 28 V/m/s
· Damping coefficient: 0.60
· Output impedance: 380 Ω
· Harmonic distortion: ≤0.2%
· Operating temperature: -20 to 70 °C
· Dimensions: 66 × 66 × 66 mm
· Weight: 687 g
Note: the TCS-D3 low-frequency triaxial velocity sensor has a wider test band than the TCS-B3, especially at 1-5 Hz, and is particularly suitable for vibration monitoring of medium-deep hole blasting, piling and dynamic compaction. Do not drop the sensor or mishandle it.
▲ Velocity sensor verification certificate attached
Calibration certificate - Sichuan Institute of Metrology



Verification certificate - Aerospace Metrology and Testing Research Institute
(This is an X, Y, Z triaxial vibration velocity sensor; due to shaker limitations of the testing agency, only the Z axis was verified)
