中文

Home/Products/SensorsVelocity / acceleration / pressure

Sensors

Velocity, acceleration, air-blast and noise sensors with cables and mounting bases, compatible with all TC-4850 recorders.

Home › Products › Products › Triaxial Accelerometer 4
Triaxial Accelerometer 4

Triaxial Accelerometer 4

Products

The TC-4850 blasting vibration meter developed by Chengdu Zhongke Chuankong measures the peak particle velocity and frequency of ground vibration at monitoring points during blasting. It is suitable for vibration monitoring of dam, bridge, tunnel, railway and highway blasting projects, environmental safety assessment of blasting operations and vibration monitoring in similar fields, and can also serve as teaching equipment for related university courses.

Applications

vibration monitoring of brid…

Channels

x, y, z three channels (tria…

Frequency response

DC- 400 HZ (-1dB)

Range

±2 g (±5 V)

View all Products →

Key Specifications

Parameters below are extracted from this page; values and units are kept verbatim.

Applicationsvibration monitoring of bridges, tunnels, mines, dams and other large structures, and petroleum geophysical exploration (shale oil and gas)
Channelsx, y, z three channels (triaxial acceleration)
Frequency responseDC- 400 HZ (-1dB)
Range±2 g (±5 V)
Sensitivity5 V / g
Resolution0.25 mg (acceleration)
Temperature drift< 0.2 mg / °C
Noise density45 ug / √Hz
Nonlinearity0.1%
Power consumption< 120 mW
Temperature range-40 to 85 °C
Dimensions52 × 33 × 38 mm

Triaxial accelerometerIt can be directly connected to recording and display and acquisition instruments, simplifying the test system and improving accuracy and reliability. Widely used in nuclearexplosions, aerospace, railways, bridges, buildings, vehicles and ships, machinery, water conservancy, electric power, petroleum, geology,

environmental protection, seismology and other fields.

▲ Key features

1. Low-impedance output, anti-interference, low noise, suitable for long cable transmission:

2. Cost-effective and easy to install, especially suitable for multi-point measurement.

3. Stable and reliable, resistant to moisture, dust and harmful gases.

Applications: vibration monitoring of bridges, tunnels, mines, dams and other large structures, and petroleum geophysical exploration (shale oil and gas)


▲ Specifications

WZ-B2 triaxial accelerometerLC0161D triaxial accelerometer

Channels: x, y, z three channels (triaxial acceleration)

Frequency response:DC- 400 HZ (-1dB)

Range:±2 g (±5 V) 

Sensitivity: 5 V / g     

Resolution: 0.25 mg (acceleration)

Temperature drift: < 0.2 mg / °C

Noise density: 45 ug / √Hz

Nonlinearity: 0.1%

Power consumption: < 120 mW

Temperature range: -40 to 85 °C

Dimensions: 52 × 33 × 38 mm

Weight: 190 g ± 10 g

Waterproof rating: IP 68

Channels: x, y, z three channels (triaxial acceleration)

Frequency response: 0.1-1000 Hz (±10%)

Range: ±5 g;

Mounted resonance: 5 kHz

Sensitivity: 1000 mV/g 

Resolution:   0.02 mg    

Weight: 260 g

Temperature range: -40 to 120 °C

Acceleration signal cable: 5 m   

With strong magnetic mount







PreviousTCS-B3 Triaxial Vibration Velocity Sensor (Geophone)NextSingle-axis velocity sensor (geophone), vertical/horizontal
← Back to Products