A blasting vibration meter generally uses a triaxial vibration velocity sensor: x horizontal, y horizontal, z vertical. One test obtains the vibration velocities and main frequencies in the X, Y, Z directions. Channels 1, 2, 3 of the TC-4850 correspond to sensor x, y, z respectively.What Do X, Y, Z of a Blasting Vibration Meter Mean??
For safety criteria, the largest of the three components is used for evaluation, per Section 13.2 of the Blasting Safety Regulations GB 6722-2014
13.2 Safe Allowable Distance for Blasting Vibration
13.2.1 Different safety criteria and allowable standards shall be used to evaluate the vibration impact of blasting on different types of buildings (structures), facilities and equipment, and other protected objects.
13.2.2 The blasting vibration criteria for ground buildings, power plant central control room equipment, tunnels and roadways, high rock slopes and newly poured mass concrete adopt the peak particle vibration velocity and main vibration frequency at the foundation of the protected object. The allowable safety standards are shown in Table 13-1.
