中文

News

On Routine Maintenance of Blasting Vibration Meters

Zhongke Instruments · News2014-02-25 11:17:59

Home/News/On Routine Maintenance of Blasting Vibration Meters
Content

In the application of theblastingvibration meter, faults are not terrible; what matters most is detecting them promptly, finding the cause and solving them quickly. So it is necessary to master some routine maintenance methods for blasting vibration meters during use to minimize faults. Below, experts from the Instrument World website introduce the routine maintenance methods of blasting vibration meters.
Correct use
Operators should carefully read the instrument manual, be familiar with its performance and master the correct usage. Start and stop the instrument strictly per the operating procedures to keep it in good running condition. Pay attention to the use and maintenance checks of auxiliary equipment and facilities.
Environmental requirements
Temperature and humidity under harsh conditions affect instruments. Electronic components, especially integrated circuits, need to work within a suitable temperature range. Therefore, to ensure instrument precision and extend service life, keep the instrument always within the required temperature range.
Per field experience, vibration measurement conditions in blasting projects are mostly harsh, in places prone to flyrock. So the vibration meter needs good protection - the instrument has an IP65 protection rating with good shock, drop, water and dust resistance; strictly avoid collision, heavy impact, moisture, strong electricity, magnetic fields, oil and dust.
During installation, ensure the blasting vibration meter is level; the connection between the meter and the measured object must be rigid; when testing, generally point the X or Y direction of the meter toward the blast center.
Regular power-on
During long periods of disuse, the maintenance of blasting vibration meters is equally important - never neglect it. In this period, power on regularly 1-2 times every so often, which prevents moisture and keeps the instrument in working condition, preventing obvious changes in performance indicators after long shutdown. This is very beneficial for the instrument.
Before charging, check that the supply voltage matches the operating voltage of 220 V; keep the rechargeable lithium-ion battery charged long-term; a new battery reaches optimal performance only after two or three full charge-discharge cycles.
Case cleaning
Alcohol and thinners corrode the case, especially the window - so when cleaning, just wipe gently with cotton thread dipped in a small amount of clean water.
The above is the routine maintenance of blasting vibration meters - we must do it carefully so that the meter does not often fail and affect normal use.