Selection of blasting vibration monitoring items --Blasting Vibration MeterVibration velocity, vibration acceleration and air shock waves can be measured
Blasting vibration monitoring includes the measurement of blasting vibration velocity and blasting vibration acceleration.
Vibration velocity: the velocity of reciprocating motion of medium particles under the action of seismic waves;
Vibration acceleration: the rate of change over time of the velocity of reciprocating motion of medium particles induced by seismic waves;
Selection of monitoring items
1. For the blasting vibration criteria of ground buildings, power station (plant) central control room equipment, tunnels and roadways, high rock slopes and newly poured mass concrete, the monitoring items adopt the peak particle vibration velocity and dominant vibration frequency at the foundation of the protected object;
2. When numerical analysis is performed using the velocity response spectrum, particle vibration acceleration monitoring may be omitted;
3. For special protected objects such as nuclear power plants and precision instruments controlled by seismic inertia forces, blasting vibration acceleration shall be adopted as the safety criterion.
Method for Determining the Safety Permissible Range of Building Blasting Vibration
1. Implement according to the blasting vibration safety permissible standards in the Safety Regulations for Blasting, taking the building safety permissible particle vibration velocity;
2. When taking the building safety permissible particle vibration velocity, the importance of the building, construction quality, degree of newness, natural frequency and foundation conditions should be comprehensively considered;
3. The safety permissible particle vibration velocity of key protected ancient buildings and historic sites at or above the provincial level shall be selected after expert demonstration and reported to the corresponding cultural relics administration department for approval;
4. When selecting the safety permissible particle vibration velocity for tunnels and roadways, the importance of the structure, surrounding rock classification, support status, excavation span, burial depth, blast source direction and surrounding environment should be comprehensively considered;
5. For permanent high rock slopes, the importance of the slope, initial stability of the slope, support status and excavation height should be comprehensively considered;
6. The safety permissible particle vibration velocity of non-water-retaining newly poured mass concrete is selected according to the upper limit values given in this table;
7. For special protected objects such as nuclear power plants and precision instruments controlled by seismic inertia forces, blasting vibration acceleration shall be adopted as the safety criterion, and the safety permissible particle acceleration is given by the relevant operating unit.
In all the above cases, the Zhongke Measurement and Control blasting vibrometer series can be used, equipped with various velocity sensors, acceleration sensors and low-frequency sensors. Suitable for all kinds of blasting project sites!