中文

News

Application of Vibration Reduction Hole Micro-Shock Blasting in Metro Construction

Zhongke Instruments · News2017-06-16 10:58:38

Home/News/Application of Vibration Reduction Hole Micro-Shock Blasting in Metro Construction
Content

Abstract: From three aspects - the principle, design, safety measures and precautions of vibration reduction hole micro-shock blasting in metro tunnel construction - the key points of vibration reduction hole micro-shock blasting construction are elaborated.  

Keywords: vibration reduction hole micro-shock blasting; buildings (structures); safety  Main text:  

Taking a section of a bid section of the Dalian Metro as an example: the section design includes civil works such as the main body of the mining-method section tunnel, pump house, civil defense section and detour air duct. There are buildings (structures) below the section; the relative position relationship between the two is that the distance from the top of the section structure to the pile bottom of the building (structure) is 3.7 meters; the building (structure) is a reinforced concrete frame structure with a reinforced concrete flat pile-raft foundation. According to the requirements of the Dalian headquarters, considering the safety of the building and humanistic care, the construction technology needs to be adjusted, blasting vibration strictly controlled, and building safety and disturbance issues put first.  

Taking this as an example, a brief discussion is made on the application of vibration reduction hole micro-shock blasting (hereinafter referred to as vibration reduction blasting) in metro tunnel construction.  

I. Principle of vibration reduction blasting  

This vibration reduction blasting mainly achieves the purpose of vibration reduction by arranging vibration reduction holes around the arch to form a vibration isolation zone, adding vibration reduction holes in the cut area, and adopting presplit blasting. The principle is to use the free face of blasting and the vibration isolation zone to absorb and consume a large amount of blasting vibration capacity during blasting, so that the vibration received by the area behind the isolation zone is greatly reduced. At the same time, the charge quantity of one blasting is reduced, and the blasting vibration velocity value is controlled within 

1.5 cm/s, which also greatly reduces the disturbance to the upper buildings (structures) during blasting, thereby ensuring blasting safety.  

II. Design of vibration reduction blasting  

The section is divided into upper and lower bench excavation; this design is the vibration reduction blasting design for the upper bench of the section.  (1) Determination of various parameters of vibration reduction blasting  

1. The diameter of vibration reduction holes is φ100 mm  

2. Layout of vibration reduction holes 

 

Arranged around the arch, with two rings in total; hole spacing is 350 mm x 350 mm, arranged in a quincunx pattern. 12 vibration reduction holes are arranged in the cut area.  

3. Each drilling depth is 20 meters; the length in curved sections is appropriately shortened to 6-10 m to ensure drilling accuracy.

For more blasting monitors and blasting vibration monitors, please consult us at any time