Industry Standards

中文

Home/Support/StandardsGB / T-CSEB / JJG

Standards

A collection of blasting safety codes, monitoring standards and verification regulations.

Filter by category
51 standards & regulations · Click a category to filter across all 5 pages
Industry Std

Standard for Appraisal of Dangerous Buildings (JGJ 125-2016)

1 General. 1.0.1 This standard is formulated to effectively utilize existing buildings, accurately judge structural danger, handle dangerous buildings in time and ensure structural safety. 1.0.2 It applies to danger appraisal of existing buildings not exceeding 100 m in height. 1.0.3 Appraisal shall also comply with current relevant national standards. 2 Terms and symbols 2.1 Terms 2.1.1 Existing

Read more →
Industry Std
Industry Std

DL/T 5333-2005 Regulation for Blasting Safety Monitoring of Hydropower and Water Resources Projects

DL/T 5333-2005 Regulation for Blasting Safety Monitoring of Hydropower and Water Resources Projects Download

Read more →
National Std

Technical Code for Monitoring of Building and Bridge Structures (GB 50982-2014)

1 General. 1.0.1 This code standardizes monitoring technology and analysis/early-warning for building and bridge structures - advanced, reliable and economical. 1.0.2 It applies to monitoring of high-rise/tall, large-span, bridge, isolation and other engineering structures, and of existing structures affected by crossing construction. 1.0.3 Monitoring shall also comply with current national standards. 2 Terms and symbols 2.1 Terms 2.1.1 structural monitoring&nb

Read more →
Codes
Codes

General methods and specifications for transformer transportation

1. 3D shock recorders for transformer transport Large transformers cannot be transported with oil due to their mass; they are filled with nitrogen to keep the core from air contact and moisture. The nitrogen pressure must stay positive to protect the seal; after release, qualified transformer oil must be filled immediately - take care for personal safety when releasing nitrogen. During transport, a 3D shock recorder with time stamps and proper range shall be installed per specification; on arrival,

Read more →
Codes
Codes

Main contents of blasting safety assessment

(1) Whether the blasting unit's qualifications comply with regulations; (2) whether the project class meets national standards; (3) whether design data is complete; (4) whether design methods and parameters are reasonable; (5) whether the initiation network is reliable; (6) whether the design option is feasible; (7) whether harmful effects and impact scope are fully considered; (8) whether safety measures are feasible; (9) whether accident prevention and rescue measures are appropriate. Qualification review requires qualified blasting vibration meters

Read more →
Templates
Templates

Blasting vibration testing report template (for blasting vibration meters)

The analysis software includes a simple report template exportable to Word. Many users asked for a fuller template - here are some collected from customers, shared with all! Blasting vibration testing report template download: http://wenku.baidu.com/view/10ffd80ecc22bcd126ff0c93 XX Security Engineering Testing Co. Blasting vibration testing report&nb

Read more →
National Std
National Std

Technical Specification for Protection of Historic Buildings against Industrial Vibration

GB/T 50452-2008 Technical Specification for Protection of Historic Buildings against Industrial Vibration Download. Introduction: approved and issued by the Ministry of Housing and Urban-Rural Development (Announcement No. 121), effective Jan 1, 2009. Contents: 1 General; 2 Terms and symbols; 3 allowable vibration standards for historic structures; 4 assessment of industrial vibration impact; 5 ground vibration propagation; 6 dynamic characteristics of historic structures and

Read more →
Industry Std
Industry Std

Qualification Conditions and Management Requirements for Blasting Units (GA 990-2012)

Public security industry standard of the PRC, GA 990-2012, Qualification and management requirements for blasting units issued 2012-05-02, effective 2012-06-01, by the Ministry of Public Security GA990-2012 download &

Read more →
National Std
National Std

GB 50868-2013 Standard for Allowable Vibration of Building Engineering

This standard applies to vibration control and impact assessment of building engineering under industrial and environmental vibration. Download: GB 50868-2013. English name: Standard for allowable vibration of building engineering. Issued by: Ministry of Housing and Urban-Rural Development. Issued: 2013-01-28. Effective:

Read more →
Templates
Templates

Charging Standards for Engineering Survey and Design

Notice on the Charging Management Rules for Engineering Survey and Design Jan 7, 2001 Ji-Price [2002] No. 10 To relevant State Council departments and provincial planning/price/construction authorities: To implement the General Office of the State Council forwarding of the Ministry of Construction

Read more →